 |
|
COMBINATION CHUCK WITH FACE DRIVER & FINGER (SM-CBN) |
|
 |
• This is a Shaft processing Chuck only.
• Where installed the Face Driver. When You can completer processing by just one time if you have the two times needed processing materials.
• It needs double Cylinder.
|
|
|
|
|
|
|
|
|
 |
|
 |
|
 |
|
Spec
Model
|
Gripping Max | Gripping Min | Max. permissible input force KN(kgf) | Max. static gripping force KN(kgf) |
| SM-CBN 230 | 110 | 20 | 45(2580) | 75(7600) | | SM-CBN 250 | 110 | 25 | 75(7600) | 100(10200) | | SM-CBN 300 | 140 | 40 | 80(8150) | 120(12200) |
|
|
Spec
Model
|
Max. Permissible speed r.p.m | weight(With standard soft jaws) | matching cylinder | GD2 | |
| SM-CBN 230 | 3500 | 68 | 120/80 | 4.12(0.42) | | SM-CBN 250 | 3000 | 85 | 160/80 | 7.74(0.79) | | SM-CBN 300 | 2500 | 120 | 160/80 | 13.23(1.35) |
|
|
 |
|
Item
Model
|
A | B | C | D | F | J |
| SM-CBN 230 | 230 | 133.4 | 106.719 | 233 | 55 | 18 | | SM-CBN 250 | 250 | 133.4 | 106.719 | 225 | 52 | 18 | | SM-CBN 300 | 300 | 171.4 | 196.869 | 244 | 55 | 22 |
|
|
Item
Model
|
K | E MAX | E MIN | G MAX | G MIN | |
| SM-CBN 230 | 6-M12 | 290 | 235 | 186 | 108 | | SM-CBN 250 | 6-M12 | 278 | 226 | 199 | 121 | | SM-CBN 300 | 6-M12 | 306 | 251 | 141 | 66 |
|
|
